As·ev
Products
Low voltage variable frequency power cable
The variable frequency cable is mainly used for the connection between the variable frequency power supply and the variable frequency motor, as well as the transmission and distribution lines with a rated voltage of 1KV and below.
Definition of high voltage line: According to GB/T2900.50-2008, definition 2.1 stipulates that high voltage line usually refers to transmission line with voltage above 10KV (including 10KV), and high voltage usually does not include 1000V.
High voltage variable frequency power cable
3.6/6kV to 26/35kV. This product is used for AC 50Hz rated voltage 26/35kV and below the transmission and distribution lines.
Mainly including nuclear power plant cable, wind power cable, photovoltaic cable.
The pre-branch cable is mainly composed of trunk cable, branch line, branch joint and related accessories, and has three types: ordinary type, flame retardant type (ZR) and fire-resistant type (NH). The main model FZ series, FZ safety cleaning series, FZ oxygen barrier pre-branch series.
Special cable is a series of products with unique performance and special structure, including electronic computer cable, silicone rubber power cable, silicone rubber control cable, fluorine plastic power cable, fluorine plastic control cable, the safety cable, the new bypass flexible cable.
Marine cables are rubber or plastic insulated copper wire stranded conductor cables that are used to transmit electrical energy to various water structures such as Haihe, ocean-going ships and offshore oil platforms.
Control cables transmit electrical energy directly from the distribution point of the power system to the power connection lines of various electrical equipment appliances. The main types of control cables are KVV, KVVP, KVVP2, KVVV22, KVVR, ZR-KVV, ZR-KVV22, ZR-KVVP, ZR-KVVR, ZR-KVVRP,KYJV, KYJVP, KYJVP2, KYJVP3, KYJV22, KYJV32, KYJY, KYJYP, KY4, HFKYRP, KYJY4KP.
Mining cables are generally classified into flexible rubber‑sheathed cables for mobile equipment and fixed‑installation power cables. The main types of rubber‑sheathed mining cables include: MY, MYP, MCP, MCPT, MCPTJ, MVFP, MVFPT, and MYPTJ. They are primarily used for the electrical connection of underground mobile mining equipment, for connecting cutters and similar machinery, as well as for linking frequency converters installed underground, or for connecting portable underground frequency converters, among other applications. The conductor in flexible rubber‑sheathed mining cables typically consists of multiple strands of fine copper wires. The insulation material is an ethylene–propylene rubber compound, while the sheath is made from a flame‑retardant chlorinated polyethylene blend. Different shielding structures and sheath colors are employed depending on the voltage levels. Purpose >• Mobile rubber-sheathed flexible cable for coal minesPower connection for mobile coal mining equipment both above and below the mine shaft.• Mobile shielded rubber sheathed flexible cable for coal minesPower connection for mobile coal mining equipment both above and below the mine shaft.• Mobile metal-shielded rubber-sheathed flexible cable for coal minesPower connection of mobile coal mining equipment both above and below the mine shaft• Mobile metal-shielded monitoring rubber-sheathed flexible cable for coal minesPower connection of mobile coal mining equipment both above and below the mine shaft• Rubber-sheathed cable for electric drills used in coal minesPower connection for mobile coal mining equipment both above and below the mine shaft.• Mobile light rubber-sheathed flexible cable for coal minesPower connection for mobile coal mining equipment both above and below the mine shaft.• Rubber-sheathed flexible cable for coal cuttersPower connection for coal cutters and similar equipment with a rated voltage of 0.38/0.66 kV.• Sheathed flexible cable for coal cutterPower connection for coal cutters and similar equipment.• Metal-shielded rubber-sheathed flexible cable for coal cuttersPower connection of coal cutters and similar equipment• Shielded rubber-sheathed cable for electric drills in coal minesLighting for underground tunnels in coal mines, interlocking of conveyors, and power connection for control and signaling equipment. Model and specification>>Mobile rubber-sheathed flexible cable for coal minesModel MYSpecification: 1 core: 4~1853+1 core: power line core 4~185; ground wire core 4~50Executive standard: MT 818.5-2009Mobile shielded rubber sheathed flexible cable for coal minesModel MYPSpecifications: MYP0.38/0.66kV, 0.66/1.14kV:3+1 cores: power core 4~185; ground core 4~50MYP 3.6/6kV:3+1 core: power core 16~150: ground core 16~50Executive standards: MT 818.5-2009, MT 818.7-2009Mobile metal-shielded rubber-sheathed flexible cable for coal minesModel MYPTSpecification MYPT 1.9/3.3kV:3+1 core: power core 35~150; ground core 35/3~50/3MYPT 3.6/6kV. 6/10kV:3+1 core: power core 16~150; ground core 35/3~50/3Implement the standard MT 818.7-2009Mobile metal-shielded monitoring rubber-sheathed flexible cable for coal minesModel MYPTJSpecification MYPTJ3.6/6kV:3+3+3 cores: power core 25~150; ground core 35/3~50/3; monitoring core: 2.5MYPTJ6/10kV. 8.7/10kV:3+3+3 cores: power core 25~185; ground core 35/3~50/3; monitoring core: 2.5Implement the standard MT 818.7-2009Rubber-sheathed cable for electric drills used in coal minesModel: MZSpecifications: 3+1 cores, 3+1+1 cores: power core 2.5~4; ground core 2.5~4Implement the standard MT 818.8-2009Mobile light rubber-sheathed flexible cable for coal minesModel MYQSpecifications 2, 3, 4, 7, 12€: 1~2.5Implementing standard MT 818.8-2009Rubber-sheathed flexible cable for coal cutterModel MCSpecification 3+1 core: power core 16~120; ground core 4~25Implement the standard MT 818.2-2009Coal cutter shielded rubber sheathed flexible cableModel MCPSpecification MCP-0.38/0.66kV: 3+1 cores: power core 16~120: ground core 4~25MCP-0.66/1.14kV MCP-1.9/3.3kV: 3+1 cores: power core 16~150Ground wire core 4~35Follow the standard MT 818.2-2009Metal-shielded rubber-sheathed flexible cable for coal cuttersModels MCPT, MCPTJSpecification MCPT (MCPTJ)-0.66/1.14kV: 3+1+1 cores: power core 4~185;Ground wire core 4~70: Control wire core: 1.5~10MCPT-(MCPTJ)1.9/3.3kV: 3+1+1 cores: power core 16~150;Ground wire core: 16~70; Control wire core: 2.5~10Implement the standard MT 818.4-2009Shielded rubber-sheathed cable for electric drills in coal minesModel MZPSpecifications: 3+1 cores, 3+1+1 cores: power core 2.5~4; ground core 2.5~4Implement the standard MT 818 8-2009 Usage characteristics• Mobile rubber-sheathed flexible cable for coal minesRated voltage: 0.38/0.66kV; the minimum bending radius of the cable is 6 times the cable diameter; the ground wire should be well grounded.• Mobile shielded rubber sheathed flexible cable for coal minesRated voltage: 0.38/0.66 kV, 0.66/1.14 kV, 3.6/6 kV: The minimum bend
Mining cables are generally divided into flexible rubber‑sheathed cables for mobile equipment and fixed‑installation power cables. The main types of rubber‑sheathed mining cables include: MY, MYP, MCP, MCPT, MCPTJ, MVFP, MVFPT, and MYPTJ. They are primarily used for the electrical connection of underground mobile mining equipment, for connecting cutters and similar machinery, as well as for linking frequency converters installed underground, or for connecting portable underground frequency converters, among other applications. The conductor in flexible rubber‑sheathed mining cables typically consists of multiple strands of fine copper wires. The insulation material is an ethylene–propylene rubber compound, while the sheath is made from a flame‑retardant chlorinated polyethylene blend. Different shielding structures and sheath colors are employed depending on the voltage levels. Purpose >• Mobile rubber-sheathed flexible cable for coal minesPower connection for mobile coal mining equipment both above and below the mine shaft.• Mobile shielded rubber-sheathed flexible cable for coal minesPower connection for mobile coal mining equipment both above and below the mine shaft.• Mobile metal-shielded rubber-sheathed flexible cable for coal minesPower connection of mobile coal mining equipment both above and below the mine shaft• Mobile metal-shielded monitoring rubber-sheathed flexible cable for coal minesPower connection of mobile coal mining equipment both above and below the mine shaft• Rubber-sheathed cable for electric drills in coal minesPower connection for mobile coal mining equipment both above and below the mine shaft.• Mobile light rubber-sheathed flexible cable for coal minesPower connection for mobile coal mining equipment both above and below the mine shaft.• Rubber-sheathed flexible cable for coal cutterPower connection for coal cutters and similar equipment with a rated voltage of 0.38/0.66 kV.• Sheathed flexible cable for coal cutterPower connection for coal cutters and similar equipment.• Metal-shielded rubber-sheathed flexible cable for coal cuttersPower connection of coal cutters and similar equipment• Shielded rubber-sheathed cable for electric drills in coal minesLighting for underground coal mine tunnels, interlocking of conveyors, and power connection for control and signaling equipment. Mobile rubber-sheathed flexible cable for coal minesModel MYSpecification: 1 core: 4~1853+1 core: power line core 4~185: ground wire core 4~50Implement the standard MT 818.5-2009Mobile shielded rubber sheathed flexible cable for coal minesModel MYPSpecification: MYP0.38/0.66, 0.66/1.14kV3+1 core: power line core 4~185; ground wire core 4-~50MYP 3.6/6 kV3+1 core: power core 16~150, ground core 16~50Implement standards MT818.5-2009 and MT818.7-2009Mobile metal-shielded rubber-sheathed flexible cable for coal minesModel MYPTSpecification MYPT 1.9/3.3kV3+1 core • power core 35~150 • ground core 35/3~50/MYPT3.6/6kV 6/10kV.3+1 core • Power core 16~150 • Ground core 35/3~50/3Implement standard MT 818.7-2009Mobile metal-shielded monitoring rubber-sheathed flexible cable for coal minesModel MYPTJSpecification MYPTJ3.6/6kV:3+3+3 cores: power core 25~150; ground core 35/3~50/3; monitoring core: 2.5MYPTJ6/10kV.8.7/10kV3+3+3 cores: power core 25~185; ground core 35/3~50/3; monitoring core: 2.5Implement the standard MT 818.7-2009Rubber-sheathed cable for electric drills used in coal minesModel MZSpecifications: 3+1 core, 3+1+1 core: power core 2.5~4, ground core 2.5~4Implement the standard MT818.8-2009Mobile light rubber-sheathed flexible cable for coal minesModel MYQSpecification: 2.3.4.7. 12-core, 1~2.5Implement standard MT 818.8-2009Rubber-sheathed flexible cable for coal cutterModel MCSpecification 3+1 core: power core 16~120; ground core 4~25Implement standard MT 818.2-2009Coal cutter shielded rubber sheathed flexible cableModel MCPSpecification MCP-0.38/0.66kV 3+1 core: power core 16~120; ground core 4~25MCP-0.66/1.14KV MCP-1.9/3.3kV: 3+1 cores: power core 16~150Ground wire core 4~35Implement the standard MT8189-2009Metal-shielded rubber-sheathed flexible cable for coal cuttersModels MCPT, MCPTJSpecification MCPT (MCPTJ)-0.66/1.14kV: 3+1+1 cores: power core 4~185Ground wire core: 4~70; Control wire core: 1.5~10MCPT-(MCPTJ)1.9/3.3kV: 3+1+1 cores: power core 16~150Ground wire core: 16~70; Control wire core: 2.5~10Implement standard MT 818.4-2009Shielded rubber-sheathed cable for electric drills in coal minesModel MZPSpecifications: 3+1 core, 3+1+1 core: power core 2.5~4; ground core 2.5~4Implement standard MT 818.8-200 Usage characteristics• Mobile rubber-sheathed flexible cable for coal minesRated voltage: 0.38/0.66kV; the minimum bending radius of the cable is 6 times the cable diameter; the ground wire should be well grounded.• Mobile shielded rubber sheathed flexible cable for coal minesRated voltage: 0.38/0.66 kV, 0.66/1.14 kV, 3.6/6 kV: The minimum bending radius of the cable is the cable diameter6 times the d
Flexible mineral insulated cable is composed of copper core, metal sheath and magnesium oxide insulation and other inorganic materials, the main models are BTTQ, BTTVQ, BTTYQ, BTTZ, BTTVZ BTTVZ.
BVR wire is a kind of special soft wire for power distribution cabinet, also called secondary wire. Copper core PVC insulated flexible wire, which is used in fixed wiring when soft occasions. By the majority of electrical and architectural decoration personnel like.
BLV aluminum core PVC insulated wire. When laying the wire temperature is not less than 0 ℃, in normal use, the maximum rated temperature of the conductor is 70 ℃.
BVV line is a kind of decoration commonly used wire, commonly known as hard sheath line, relative to RVV soft sheath line, its characteristic is naturally its "hard. BVV line is commonly used in decoration wiring, because it has a layer of sheath more than ordinary BV line, which saves the threading pipe and threading slot, and is more safe, convenient, fast and beautiful, so it has been welcomed by many decoration companies and home users.
BVVB indicates that the cable is PVC insulated and PVC sheathed flat cable for fixed wiring.
It is a kind of PVC insulated wire, suitable for fixed laying of power units with AC rated voltage of 450/750V and below. The long-term allowable working temperature of the wire is not more than 105 ℃ for BV-105 models and 70 ℃ for other models. The wire laying temperature shall not be lower than 0 ℃.